Implementing Cisco IP Switched Networks 642-813 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서642-813 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전642-813 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

Cisco CCNP 642-813 시험덤프

Exam : 642-813
Title :Implementing Cisco IP
Switched Networks
Version : Demo
1.You have just created a new VLAN on your network. What is one step that you should include in your
VLAN-based implementation and verification plan?
A. Verify that different native VLANs exist between two switches for security purposes.
B. Verify that the VLAN was added on all switches with the use of the show vlan command.
C. Verify that the switch is configured to allow for trunking on the switch ports.
D. Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
Answer: B
2.How does VTP pruning enhance network bandwidth?
A. by restricting unicast traffic to across VTP domains
B. by reducing unnecessary flooding of traffic to inactive VLANs
C. by limiting the spreading of VLAN information
D. by disabling periodic VTP updates
Answer: B
3.In which three HSRP states do routers send hello messages? (Choose three.)
A. standby
B. learn
C. listen
D. speak
E. active
ADE
4.On a multilayer Catalyst switch, which interface command is used to convert a Layer 3 interface to a
Layer 2 interface?
A. switchport
B. no switchport
C. switchport mode access
D. switchport access vlan vlan-id
Answer: A

더많은 데모보기

http://www.killtest.kr/CCNP/642-813.asp

LCSE Cisco Lifecycle Services Express 650-393 시험의 문제와 답은 완전한 오리지날 시험덤프입니다. 650-393 덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 650-393 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전650-393덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

Cisco Sales Expert 650-393 시험덤프

Exam : 650-393
Title :Cisco 650-393 Cisco
Lifecycle Services
Express(LCSE)
Version : Demo
1.Which three best describe the partner benefits of the Cisco Lifecycle Services approach? (Choose
three.)
A. Improve customer satisfaction rates
B. Improve the skill sets of their staff members
C. Increase their staff productivity
D. Reduce the risk involved with deploying and supporting new and complex technologies
E. Improve response times for network outages
F. Help ensure that suppliers are meeting metrics
Answer: A,C,D
2.Which three of these service components are in the design phase.?
(Choose three.) Select exactly 3 answer(s) from the following:
A. Account Qualification and Planning
B. Detailed Design Development
C. Staff Training
D. Systems Acceptance Test Plan Development
E. Staging Plan Development
F. Site Readiness Assessment
Answer: B,D,E
3.Which prepare phase service component involves providing a customer with a financial justification for
adopting a technology? Select exactly 1 answer(s) from the following:
A. Technology Strategy Development
B. High-Level Design Development
C. Business Case Development
D. Proof of Concept
Answer: C

http://www.killtest.kr/SalesExpert/650-393.asp

Implementing Cisco IP Switched Networks 642-813 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.  642-813  덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 642-813 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 642-813 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

Cisco CCNP 642-813 시험덤프

Exam : 642-813
Title :Implementing Cisco IP
Switched Networks
Version : Demo
1.You have just created a new VLAN on your network. What is one step that you should include in your
VLAN-based implementation and verification plan?
A. Verify that different native VLANs exist between two switches for security purposes.
B. Verify that the VLAN was added on all switches with the use of the show vlan command.
C. Verify that the switch is configured to allow for trunking on the switch ports.
D. Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
Answer: B
2.How does VTP pruning enhance network bandwidth?
A. by restricting unicast traffic to across VTP domains
B. by reducing unnecessary flooding of traffic to inactive VLANs
C. by limiting the spreading of VLAN information
D. by disabling periodic VTP updates
Answer: B
3.In which three HSRP states do routers send hello messages? (Choose three.)
A. standby
B. learn
C. listen
D. speak
E. active
ADE
4.On a multilayer Catalyst switch, which interface command is used to convert a Layer 3 interface to a
Layer 2 interface?
A. switchport
B. no switchport
C. switchport mode access
D. switchport access vlan vlan-id
Answer: A
5.Which two statements are true about HSRP, VRRP, and GLBP? (Choose two.)
A. GLBP allows for router load balancing of traffic from a network segment without the different host IP
configurations required to achieve the same results with HSRP.
B. GLBP allows for router load balancing of traffic from a network segment by utilizing the creation of
multiple standby groups.
C. GLBP and VRRP allow for MD5 authentication, whereas HSRP does not.
D. Unlike HSRP and VRRP, GLBP allows automatic selection and simultaneous use of multiple available
gateways.
E. HSRP allows for multiple upstream active links being simultaneously used, whereas GLBP does not.
Answer: AD

더많은 데모보기

http://www.killtest.kr/CCNP/642-813.asp

★HOT 뉴스

IT분야 ‘인기 자격증’ 컴티아

대기업에 취업해 IT전문가로 일하고 싶다면 ‘컴티아‘자격증을 따놓는게 좋다고 합니다.

세계  다국적 기업들이 모두 컴티아 자격증을 요구하고, 승진이나 연봉에도 반영 하고 있는 실정입니다.

최근엔 삼성 등 국내 대기업 들도 취업시 컴티아 자격증 보유자를 우대하기 시작했다고 합니다.

제품소개

시험코드：FC0-TS1

시험이름：CompTIA Strata IT for Sales

버전：V8.02

업데이트：2012-04-13

Q & A：140 Q&As

Killtest FC0-TS1 시험덤프개요

CompTIA Strata IT for Sales FC0-TS1 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다.

저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 FC0-TS1 덤프가 거의 모든 문제와 정답을 맞추었습니다.

여러분은 응시전 FC0-TS1덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

Exam : FC0-TS1
Title :CompTIA Strata IT for Sales
Version : Demo
1.Which of the following ports support hot swapping?
Each correct answer represents a complete solution. Choose two.
A. Parallel
B. Serial
C. IEEE 1394
D. USB
Answer: D and C
2.What is the other name for Firewire.?
A. IEEE 1395
B. IEEE 1394
C. IEEE 1396
D. IEEE 1397
Answer: B
3.Which of the following statements about High-Definition Multimedia Interface (HDMI) are true?
Each correct answer represents a complete solution. Choose two.
A. It is capable of delivering the highest quality digital video and multi-channel digital audio on a single
cable.
B. It has two types of connectors: Type A and Type B.
C. It is a new I/O bus technology that has more bandwidth than PCI and AGP slots.
D. It is an interface primarily used to connect hard disk and CD drives in a computer.
Answer: B and A
4.What is the other name of a palmtop?
A. PDA
B. Desktop
C. Laptop
D. Tablet
Answer: A
5.What is the maximum limit on the amount of mercury in RoHS material?
A. 10 ppm
B. 1000 ppm
C. 1 ppm
D. 100 ppm
Answer: D
6.Which of the following organizations developed the hyper-threading technology?
A. Microsoft
B. Intel
C. Cisco
D. HP
Answer: B
7.Which of the following is the lightest but most expensive battery used in laptops?
A. Li-Ion
B. NiCad
C. NiMH
D. Sodium-Ion
Answer: A
8.Which of the following are the types of disks or drives for CDs or DVDs?
Each correct answer represents a complete solution. Choose all that apply.
A. Random Access Memory
B. Rewritable
C. Read Only Memory
D. Recordable
Answer: C, D, and B
9.Which of the following is the most common laptop battery found today?
A. NiCad
B. Lithium-Ion
C. NiMH
D. Energizer
Answer: B
10.What transfer rate is supported by the 72-pin SO-DIMM?
A. 32-bit
B. 8-bit
C. 64-bit
D. 16-bit
Answer: A
11.What is the IEEE Standard for Ethernet?
A. IEEE 802.2
B. IEEE 802.4
C. IEEE 802.1
D. IEEE 802.3
Answer: D
12.Which of the following motherboards use 5-pin DIN keyboard connectors?
Each correct answer represents a complete solution. Choose all that apply.
A. ATA
B. XT
C. AT
D. ATX
Answer: B and C
13.Which of the following interfaces is the current standard for digital LCD monitors?
A. DVE
B. VGA
C. DVI
D. SVGA
Answer: C
14.Which of the following devices is used to provide visual input that can be easily transferred over the
internet?
A. Solid-state drive
B. Webcam
C. Iomega Zip drive
D. Trackball
Answer: B

더많은 데모보기:

http://www.killtest.kr/CompTIAStrata/FC0-TS1.asp

제품소개

시험코드：250-222

시험이름：Administration of HA Solutions for Unix using VCS 4.0

버전：V4.65

업데이트：2012-04-13

Q & A：140 Q&As

Killtest 250-222 시험덤프개요

Administration of HA Solutions for Unix using VCS 4.0 250-222 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

250-222 덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다.

저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 250-222 덤프가 거의 모든 문제와 정답을 맞추었습니다.

여러분은 응시전250-222 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

시험 세부 정보

문항 수: 70

시험 시간: 110분

합격 점수: 65%

Exam : 250-222
Title :Administration of HA
Solutions for Unix using
VCS 4.0
Version : Demo
1. A system administrator wants to install a VCS database enterprise agent on to an active/passive
cluster.
Where should the database agent files be installed?
A. on local storage on every system in the cluster
B. on local storage on the machine designated as the active system
C. on shared storage so that both active and passive systems will have access
D. on shared storage with a symbolic link to the database on the active system
Answer: A
2. Which VCS bundled agent can be used to mirror the state of a NIC resource to another service group?
A. Proxy
B. Phantom
C. IPMultiNIC
D. MnicReflect
Answer: A
3. What are three default behaviors of VCS? (Choose three.)
A. migrating applications from a system on intentional system shutdown
B. shutting down the system when an application fails on that system
C. enabling remote access for the cluster management GUI
D. AutoDisable the service groups on a system when that system fails
Answer: ACD
4. You have a two-system VCS cluster with two dedicated Ethernet heartbeats and I/O Fencing enabled.
What will happen if both heartbeat connections are lost simultaneously?
A. The cluster automatically stops on both systems.
B. All services groups are frozen on both systems.
C. All service groups are evacuated from both systems.
D. One system will panic, and the other will remain up and operational.
Answer: D
5. Given a service group where FailOverPolicy=Load, which VCS attribute does HAD use to determine
the failover target?
A. Capacity
B. Load
C. Prerequisites
D. AvailableCapacity
Answer: D
6. Which set of commands are needed to add a resource type TypeA with a RestartLimit of 2 to a running
cluster?
A. haconf -makerw
hatype add TypeA
hatype modify TypeA RestartLimit 2
haconf dump -makero
B. haconf makerw
hares add TypeA
hares modify TypeA RestartLimit 2
haconf dump -makero
C. haconf makerw
hatype add TypeA
hatype set TypeA RestartLimit 2
haconf dump -makero
D. haconf makerw
hatype modify TypeA RestartLimit 2
hatype add TypeA
haconf dump -makero
Answer: A
7. There is a requirement for an application to remain online when a public network interface fails in a
two-system VCS cluster.
Which hardware configuration is required to configure this behavior in VCS?
A. At least two public network interfaces must be present on each system.
B. One network interface per system will work as long as two or more switches are present.
C. VCS will fail over the application any time any network interface fails on a system.
D. Multiple network interfaces must be on the same controller card on each system.
Answer: A
8. You are planning to install both VERITAS Cluster Server and VERITAS Volume Manager. You will
also be changing the application environment over the course of the next 18 months.
Increasing the number of ______ will require modification of the VCS configuration. (Choose three.)
A. highly available applications
B. file systems used by the highly available applications
C. disk groups used by the highly available applications
D. disks in the disk group used by the highly available applications
Answer: ABC
9. What is a requirement for implementing a VCS cluster?
A. Hardware single points of failure must be isolated and eliminated.
B. An application must be able to restart to a known state after a failure.
C. An application must be able to run simultaneously on all clustered systems.
D. Monitored redundant hardware components must be the same make and model.
Answer: B
10. The systems you need to work on are in production and you want to minimize downtime. VCS is not
currently installed or configured, though an application is.
Which two tasks can be performed prior to the downtime window? (Choose two.)
A. modify the public network interface configuration
B. connect the Fibre Channel cable from the system to the storage switch
C. attach the copper SCSI cable to the storage array
D. modify the private network interface configuration
E. test public network interfaces by disconnecting the cables
Answer: BD

더많은 데모보기:

http://www.killtest.kr/SymantecCertifiedSecurityprogram/250-222.asp

제품소개

시험코드：250-511

시험이름：Administration of Symantec(TM) Data Loss Prevention 11

버전：V8.02

업데이트：2012-04-14

Q & A：176 Q&As

Killtest 250-511 시험덤프개요

Administration of Symantec(TM) Data Loss Prevention 11 250-511 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

250-511 덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다.

저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 250-511 덤프가 거의 모든 문제와 정답을 맞추었습니다.

여러분은 응시전 250-511 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

시험정보

 시험문제수: 90-100 문제

시험 시간 : 120분

 합격점78%

Exam : 250-511
Title :Administration of
Symantec(TM) Data Loss
Prevention 11
Version : Demo
1.How can an administrator validate that once a policy is updated and saved it has been enabled on a
specific detection server?
A. check the status of the policy on the policy list page
B. check to see whether the policy was loaded under System > Servers > Alerts
C. check the policy and validate the date and time it was last updated
D. check to see whether the policy was loaded under System > Servers > Events
Answer: D
2.An administrator is running a Discover Scanner target scan and the scanner is unable to communicate
back to the Discover Server. Where will the files be stored?
A. Discover Server incoming folder
B. scanner’s outgoing folder
C. scanner’s incoming folder
D. Enforce incident persister
Answer: B
3.Which two remediation actions are available for Network Protect? (Select two.)
A. Copy
B. Move
C. Block
D. Rename
E. Quarantine
Answer: A,E
4.A company needs to scan all of its file shares on a weekly basis to make sure sensitive data is being
stored correctly. The total volume of data on the file servers is greater than 1 TB. Which approach will
allow the company to quickly scan all of this data on a weekly basis?
A. run an initial complete scan of all the file shares, then modify the scan target to add date filters and
exclude any files created or modified before the initial scan was run
B. run an initial complete scan of all the file shares, then modify the scan target to an incremental scan
type
C. create a separate scan target for each file share and exclude files accessed before the start of each
scan
D. run an initial complete scan of all file shares, create a summary report of all incidents created by the
scan, then run weekly scans and compare incidents from weekly scans to incidents from the complete
scan
Answer: B
5.Which Network Discover option is used to determine whether confidential data exists without having to
scan the entire target?
A. Byte Throttling
B. File Throttling
C. Match Thresholds
D. Inventory Mode Scanning
Answer: D
6.A Data Loss Prevention administrator notices that several errors occurred during a Network Discover
scan. Which report can the administrator use to determine exactly which errors occurred and when?
A. Discover Incident report sorted by target name and scan
B. Full Activity report for that particular scan
C. Server Event report from Server Overview
D. Full Statistics report for that particular scan
Answer: B
7.What must a policy manager do when working with Exact Data Matching (EDM) indexes?
A. re-index large data sources on a daily or weekly basis
B. index the original data source on the detection server
C. deploy the index only to specific detection servers
D. create a new data profile if data source schema changes
Answer: D
8.Which two policy management actions can result in a reduced number of incidents for a given traffic
flow? (Select two.)
A. adding additional component matching to the rule
B. adding data owner exceptions
C. deploying to additional detection servers
D. increasing condition match count
E. adding additional severities
Answer: B,D
9.What is a feature of keyword proximity matching?
A. It will match on whole keywords only.
B. It has a maximum distance between keywords of 99.
C. It only matches on message body.
D. It evaluates each keyword pair independently.
Answer: D
10.The database is full and the Incident Persister is unable to process incidents. Which two file types
could be present in Vontu/protect/incidents? (Select two.)
A. .idx
B. .edc
C. .idc
D. .inc
E. .bad
Answer: C,E
11.A role is configured for XML export and a user executes the export XML incident action. What must be
done before history information is included in the export?
A. A remediator must take an action on the incident.
B. History must be enabled as a tab or panel in the incident snapshot layout.
C. Incident history must be enabled in the user’s role.
D. The manager.properties must be configured for XML export.
Answer: C
12.A user is unable to log in as sysadmin. The Data Loss Prevention system is configured to use Active
Directory authentication. The user is a member of two roles, sysadmin and remediator. How should the
user log in to the user interface in the sysadmin role?
A. sysadmin\username@domain
B. sysadmin\username
C. domain\username
D. sysadmin\username\domain
Answer: B
13.Which product provides support for the Citrix XenApp virtualization platform?
A. Endpoint Prevent
B. Network Discover
C. Network Protect
D. Network Prevent
Answer: A
14.What are two benefits of the Symantec Data Loss Prevention 11 security architecture? (Select two.)
A. Communication is initiated by the detection servers inside the firewall.
B. SSL communication is used for user access to the Enforce Platform.
C. Endpoint Agent to Endpoint Server communication uses the Triple Data Encryption Standard (Triple
DES).
D. Confidential information captured by system components is stored using Advanced Encryption
Standards (AES) symmetric keys.
E. All indexed data uploaded into the Enforce Platform is protected with a two-way hash.
Answer: B,D
15.Which two functions of the communications architecture ensure that the system will automatically
recover if a network connectivity failure occurs between the detection servers and the Enforce Server?
(Select two.)
A. Oracle database backup
B. detection server autonomous monitoring
C. Enforce Server offline alert notification
D. detection server incident queuing
E. detection server alert archiving
Answer: B,D

더많은 데모보기:

http://www.killtest.kr/SymantecCertifiedSecurityprogram/250-511.asp

제품소개

시험코드：250-402

시험이름：Administration of Altiris Client Management Suite 7.1

버전：V8.02

업데이트：2012-04-14

Q & A：101 Q&As

Killtest 250-402 시험덤프개요

Administration of Altiris Client Management Suite 7.1 250-402 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

250-402 덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다.

최근 출제되었던 시험문제에서 250-402 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전250-402 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

Exam : 250-402
Title :Administration of Altiris
Client Management Suite
7.1
Version : Demo
1.What are two prerequisites for installing and configuring IT Analytics? (Select two.)
A. Microsoft Reporting and Analysis Services
B. Adobe Flash
C. Microsoft SQL Server 2005 Datamining Viewer Controls
D. Microsoft Office Web Components 11 (2003)
E. Microsoft Silverlight
Answer: A,D
2.What are two prerequisites for installing Out-of-Band Management.? (Select two.)
A. SQL Server configured in mixed authentication mode
B. SQL Server configured in Windows authentication mode
C. Symantec Management Platform
D. SQL Analysis Service installed
E. SSL/TLS
Answer: A,C
3.An administrator receives notification of a new vulnerability threat from Symantec Deepsight Alert
Services. The alert includes the name of an executable that should be prevented from running. Which
policy should the administrator configure?
A. Malware Blocking policy
B. Application Metering policy
C. Custom Inventory policy
D. Software Inventory policy
Answer: A
4.The IT Security department wants to prevent all versions of a particular file sharing application from
running on company computers. Where must the software resource be defined before it can be prevented
from running?
A. Software Inventory scan
B. Software Catalog
C. Software Library
D. Software Update policy
Answer: D
5.A system administrator is testing the delivery of an application. During deployment, the administrator
determines that the install path of an MSI needed to be changed without modifying the MSI. The
administrator needs to change the command line parameters of the install package. Which policies would
be affected when the default install command line of a software package is modified in the Software
Catalog?
A. policies that are assigned to a non-managed computer
B. policies that leverage Software Discovery
C. policies currently referencing the modified entry
D. policies referencing staged software updates
Answer: C
6.An administrator is reviewing software resources in the software catalog. There is a duplicate for a
software resource. The administrator has initiated the Resolve Duplicate Software Resources Wizard and
selected the option to merge duplicate resources. What will happen to the duplicate entries in the
Software Catalog?
A. It creates a new software resource with the information from both entries and keeps the duplicates.
B. It updates the original software resource with both unique identifiers and the duplicate is deleted.
C. It creates a new software resource with the information from both entries and the entry with the newest
timestamp is deleted.
D. It updates the original software resources with the information from both entries and the entry with the
oldest timestamp is deleted.
Answer: B
7.When manually creating an entry within the Software Catalog, the administrator needs the Managed
Delivery policy to verify that prerequisite software is installed before deploying a new application. What
should the administrator use to execute a prerequisite check?
A. Detection Rule
B. Applicability Rule
C. Basic Inventory
D. Software Filter
Answer: B
8.A system administrator discovers that an unauthorized piece of software called “Solitaire 2099″ has
been installed on company desktops. The software installs a browser toolbar that prevents the use of the
company standard browser toolbar and needs to be removed immediately. The administrator has also
been instructed to identify all users that are playing the game so that they can receive a private email
about the situation. Which two capabilities of Inventory Solution will help the administrator? (Select two.)
A. Inventory Solution provides data about the number of installed instances of an application. B.Inventory
Solution automatically associates software titles to users.
B. Inventory Solution automatically determines unauthorized software titles.
C. Inventory Solution tracks how often an application is executed.
D. Inventory Solution identifies harmful applications stored on local hard drives.
Answer: A,D
9.A system administrator deployed the Inventory Solution Agent Plug-in to 15,000 endpoints across a
company. Subsequently, the administrator realizes that the performance of the Notification Server is
slower during the inventory scan times. Which two actions can be taken within Inventory Solution to
reduce the processing impact on the Notification Server during these times? (Select two.)
A. Create multiple policies on different schedules for subsets of computers.
B. Create a custom weekly schedule instead of using the default weekly schedule.
C. Enable the priority setting in the advanced settings of the inventory task.
D. Use the AeXRunControl.exe program to randomize the collection of inventory.
E. Use the throttling setting in the advanced settings of the inventory task.
Answer: A,E
10.After customizing the preboot configuration files, previously created configurations need to be updated.
Each file is highlighted and then the option to rebuild them is selected. After all items have been updated,
the “Save” button on the policy is selected to ensure all changes are stored in the database. However,
after several hours or even a day, the configuration files on the PXE servers maintain an old date instead
of the new date. Why do the PXE servers have the old date?
A. The PXE servers are missing from the policy assigned to the preboot configurations because several
policies were modified at the same time.
B. SBS Services must first be restarted to accept new policy changes from the server even though the
agent has received the policy.
C. The PXE Server configuration policy must also be updated at the same time as the preboot
configurations.
D. The preboot configuration policy changes are already saved and have been lost due to saving the
policy again.
Answer: D
11.A software was virtualized during a Managed Software Delivery installation. Which method must be
used to manage the layer?
A. Virtual Composer task
B. Software Virtualization Command task
C. Package Delivery task
D. Quick Delivery task
Answer: B
12.An administrator needs to use the Deployment Solution task listed below in a job that will be used to
capture an image of a computer running Windows XP. Prepare for Image capture Which two configuration
steps must be completed before the task can be created? (Select two.)
A. enable PXE
B. create a system configuration
C. create a sysprep token
D. upload the applicable deploy.cab file
E. add an OS license key
Answer: D,E
13.A group of computers are received from a computer manufacturer with a list of corresponding MAC
addresses. To facilitate the imaging of the computers, the list is modified and then imported to
Deployment Solution, creating new computer accounts. In a lab, all computers are started and booted into
WinPE automation. In the console, a job is assigned to each computer appropriate to its hardware; but the
computers never get the tasks or run the jobs. What is a likely reason for this behavior?
A. The number of concurrent tasks assigned for imaging is overwhelming the SQL server.
B. The computer records in the database are missing necessary key information to properly identify the
computers.
C. The network addresses assigned to the computers in the lab are outside the SBS configured ranges.
D. New computers must first check in and be given a GUID in the console before being assigned a name
and corresponding jobs or tasks.
Answer: B
14.A patch administrator is preparing to deploy new patches. The administrator needs to avoid applying
Microsoft updates to the wrong operating systems. How should the administrator deploy the patches?
A. by creating a Software Update policy to distribute the updates
B. by configuring the Import Patch Data for Microsoft task and only including applicable updates
C. by staging the update for each operating system in the test environment
D. by only applying updates to the Target with applicable computers when creating a Software Update
policy
Answer: A
15.Which two products are included in Altiris Client Management Suite 7.1? (Select two.)
A. Service Desk
B. CMDB Solution
C. pcAnywhere
D. Wise Package Studio Professional
E. Deployment Solution
Answer: C,E

더많은 데모보기:

http://www.killtest.kr/IBM-Certified-Academic-Associate/250-402.asp

제품소개

시험코드：250-370

시험이름：Administration of Symantec NetBackup 7.0 for Windows

버전：V8.02

업데이트：2012-04-13

Q & A：223 Q&As

Killtest 250-370 시험덤프개요

Administration of Symantec NetBackup 7.0 for Windows 250-370 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

250-370 덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다.

최근 출제되었던 시험문제에서 250-370   덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전  250-370 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

시험정보

시험문제수 : 70-80 문제

시험 시간 : 105분

 시험합격률:70%

언어 : 영어, 일본어

Exam : 250-370
Title :Administration of Symantec
NetBackup 7.0 for Windows
Version : Demo
1.A company installed Symantec NetBackup 7.0 on existing Windows 32-bit servers with 2 GB of RAM.
When configuring the Media Server Deduplication Option (MSDP), an error occurs. What should be done
to resolve this error?
A. add additional memory to the Symantec NetBackup servers
B. uninstall Symantec NetBackup and upgrade the servers to Windows 64-bit
C. run nbdevconfig to configure the storage servers
D. cluster the existing Symantec NetBackup servers and reconfigure the MSDP
Answer: B
2.If frequency-based cleaning of a drive is desired, which parameter must be set in the Symantec
NetBackup 7.0 administration console?
A. Cleaning Frequency (Between mounts)
B. Cleaning Frequency (In GB)
C. Cleaning Frequency (Between backups)
D. Cleaning Frequency (In hours)
Answer: D
3.A request is made to change volume residences.
Which two conditions must be met in the volume group that is associated with the changes?(Select two.)
A. All volumes in a volume group must have the same residence.
B. All volumes must have barcode labels.
C. All volumes must be assigned to scratch pool.
D. All volumes must be vaulted before adding volumes to the group.
E. All volumes must have the same media type.
Answer: A,E
4.An administrator configures two standalone LTO4 tape drives on a Symantec NetBackup 7.0media
server with an existing tape library with an LTO4 drive.
How should the administrator configure the storage units?
A. place each standalone drive in its own storage unit
B. place the two standalone drives in a single new storage unit
C. place the two standalone drives in an existing storage unit with the other LTO4 drives
D. place the two standalone drives in a new storage unit group
Answer: B
5.An administrator needs to back up a Windows 2003 client and creates a backup selections list
thatincludes the System_State directive.
What happens when the backup runs?
A. The backup runs successfully.
B. The job is partially successful. All files are backed up except the system state.
C. The backup fails. None of the files are backed up because Shadow Copy Components is required for
Windows 2003 clients.
D. The backup fails. None of the requested files are backed up because Shadow Copy
Components is required for Windows 2003 clients.
Answer: A
6.In which two processes does Symantec NetBackup 7.0 rehydrate deduplicated data? (Select two.)
A. Optimized duplication
B. Duplicate copy to tape
C. Restore to an OpenStorage device
D. Replicated copy
E. Restore to a client
Answer: B,E
7.Which version of NetBackup client (at a minimum) is required to use Symantec NetBackup LiveUpdate?
A. 6.0 GA
B. 6.0 MP4
C. 6.5 GA
D. 7.0 GA
Answer: C
8.An administrator is checking the status of a standalone drive in the Device Monitor. The Controlcolumn
status is AVR and the Ready column status is No.
What does this indicate?
A. The drive is down.
B. The drive is up and under operator control.
C. The drive is up and it is empty.
D. The drive is up, but the tape in the drive is busy.
Answer: C
9.Which command provides a list of disk pools required for restoring a client?
A. nbdevquery
B. bpimagelist
C. vmquery
D. bpdiskinfo
Answer: B
10.The Symantec NetBackup Startup and Shutdown commands on Windows are “bpup” and “bpdown”
In which directory can these commands be found?
A. install_path\NetBackup\bin
B. install_path\NetBackup\bin\admincmd
C. install_path\NetBackup\bin\support
D. install_path\NetBackup\bin\goodies
Answer: A
11.Catalog configuration can be configured to email which file to aid in catalog recovery?
A. BMR file
B. master server config file
C. support script output
D. DR file
Answer: D
12.An administrator needs to back up a file system with millions of files in the shortest amount of time.
Which option should be used?
A. enable “Compression” in the policy
B. use the FlashBackup policy type
C. enable “Collect True Image Restore” in the policy
D. use the AFS policy type
Answer: B
13.In a Symantec NetBackup 7.0 environment, where does the image database reside?
A. within the EMM database
B. on the media server
C. on the master server
D. within the master server’s Sybase database
Answer: C
14.Which two databases are used by Symantec NetBackup 7.0? (Select two.)
A. Media
B. Image
C. Volume
D. EMM
E. Device
Answer: B,D

더많은 데모보기:          http://www.killtest.kr/SymantecCertifiedSecurityprogram/250-370.asp

제품소개

시험코드：650-128

시험이름：Authorized Connected Grid Account Manager Knowledge Verification

버전：V8.02

업데이트：2012-04-14

Q & A：23 Q&As
Killtest 650-128 시험덤프개요

Authorized Connected Grid Account Manager Knowledge Verification 650-128 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

 650-128 덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다. 저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다.

최근 출제되었던 시험문제에서 650-128 덤프가 거의 모든 문제와 정답을 맞추었습니다.여러분은 응시전 650-128 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

시험정보

시험 번호 :650-128
시험시간 :30 분

시험문제수:20-25 문제
사용 가능한 언어 :영어

Exam : 650-128
Title :Connected Grid (Account
Manager) Knowledge
Version : Demo
1.Which of these trends is the main driver toward smart grid technology?
A. increased supply, which requires the integration of distributed generation sources
B. reduced demand, which causes an increase in demand and peak load
C. compliance with regulations involving government funding and rules
D. increased carbon footprint
Answer: C
2.How many levels or types of priority can be assigned on a Cisco TAC case.?
A. 1
B. 2
C. 4
D. 3
Answer: C
3.Which statement reflects the overall Cisco Smart Grid vision?
A. Sell the existing Cisco IP-based products from end-to-end of our utility customer’s smart grid
deployments.
B. Design and architect an end-to-end communications infrastructure that is integrated with the power
grid.
C. Integrate intelligent routing protocols into existing electrical grids.
D. Create a single infrastructure for unified communications from electrical generation plants to all primary
and secondary substations.
Answer: D

더많은 데모보기:

http://www.killtest.kr/Connected-Grid/650-128.asp

제품소개

시험코드：650-148

시험이름：ISSE Cisco IronPort Sales Specialist – Email

버전：V8.02

업데이트：2012-04-14

Q & A：27 Q&As

Killtest 650-148 시험덤프개요

ISSE Cisco IronPort Sales Specialist – Email 650-148 시험의 문제와 답은 완전한 오리지날 시험덤프입니다.

650-148  덤프는IT업계의 엘리트한 인증강사 및 제품 프로페셔널들이 시험문제를 완벽하게 만들었습니다.

저희는 완벽한 적중율로 높은 합격율을 자랑하고 있습니다. 최근 출제되었던 시험문제에서 650-148 덤프가 거의 모든 문제와 정답을 맞추었습니다.

여러분은 응시전 650-148 덤프내용만 잘 장악한다면 안전한 패스는 문제 없습니다.

시험정보

시험 번호 :650-148
시험 시간 :45 분

시험문제수:25-30 문제
사용 가능한 언어 :영어
Exam : 650-148
Title :ISSE Cisco IronPort Sales
Specialist – Email
Version : Demo
1.Which of the following is a good feature to enable during email security appliance (ESA) evaluations?
A. Bounce verification
B. Unwanted Market Message Detection
C. Mail Flow Central
D. Centralized Management
Answer: A
2.Your prospect says they aren’t willing to make big changes to their networks to try a Cisco IronPort
solution. That’s a problem because Cisco IronPort appliances can’t be tested unless they are the primary
gateway or filter.?
A. True for both ESA and WSA
B. False for both ESA and WSA
C. True for ESA but not WSA
D. True for WSA but not ESA
Answer: B
3.Most of the features on the M-Series management appliance are specifically for
A. ScanSafe customers
B. Email Security Customers
C. Web Security Customers
Answer: B

더많은 데모보기:

http://www.killtest.kr/IronPort/650-148.asp